I always knew that there was power in music, but this blows my mind!
A new type of miniature medical sensor that
is implanted in the body can be powered by a driving bass rhythm. The sensor would be used to measure pressure changes in parts of the body, helping those with aneurisms or incontinence due to paralysis.
The way that it works is thus: There is a tiny vibrating cantilever at the heart of the sensor. A cantilever is a thin beam attached at one end, kind of like a diving board. Music within a certain range, between 200 and 500 hertz has been found to be able to cause this little lever to vibrate. These vibrations generate electricity which can store a charge in a capacitor.
The way that it works is thus: There is a tiny vibrating cantilever at the heart of the sensor. A cantilever is a thin beam attached at one end, kind of like a diving board. Music within a certain range, between 200 and 500 hertz has been found to be able to cause this little lever to vibrate. These vibrations generate electricity which can store a charge in a capacitor.
Babak Ziai (what a name, right?!), a professor of electrical and
computer engineering and biomedical engineering said, ‘The music reaches the
correct frequency only at certain times, for example, when there is a strong
bass component.’
What’s really cool is that the acoustic
energy can bass through body tissue. Thus if the sensor is implanted in the
body, it can be recharged.
It’s a clever little device such that when
the frequency falls outside of the proper range, the cantilever stops
vibrating, automatically sending the electrical charge to the sensor, which
then takes a pressure reading. This data is then transmitted as radio signals.
Because frequencies continually change in songs, the sensor can be switch
between storing charge and transmitting data.
"You would only need to do this for a couple of minutes every hour
or so to monitor either blood pressure or pressure of urine in the
bladder," Ziaie said. "It doesn't take long to do the
measurement."
These exciting findings will be presented in the upcoming IEEE MEMS conference in a few days in Paris, and the patent is pending.